Additional Procedures | Adjusting the Degaussing Coils - 4 |
| 3 Note: Do not remove the |
| board assemblies. The |
| illustration at left shows |
| the boards removed for |
| clarification only. |
| Check for tape or clips |
| where the degaussing |
| coils overlap (near the |
| deflection yoke). |
Tape | 4 If the degaussing coils |
| are not attached with |
| tape or clips, use two |
| pieces of electrical tape |
| (about 6 inches long, |
| each) to fasten the two |
| coils closely together. |
