Additional Procedures | Reset Logic Board - 10 | |
| 4 Press the computer’s |
|
| on the rear panel beneath the power outlet. Wait | |
| minutes and then | |
| • Replace the battery | |
| • Replace the drive chassis | |
| • Replace the power supply | |
| Replacement Note: Make sure the battery is facing in | |
| the correct | |
| Note: This procedure resets PRAM. Be sure to check the | |
| computer’s time/date and other system parameter | |
| settings. | |
| Note: If this procedure resolves the problem, claim an | |
| adjustment on an SRO. If not, replace defective | |
| component and do not claim the adjustment procedure. | |
