Setting up
Connecting power supply
Put the connector of the power cord into |
|
1. the AC inlet of the projector. |
|
Firmly plug the power cord’s plug into | AC inlet |
2. the outlet. In a couple of seconds after |
|
the power supply connection, the POWER |
|
indicator will light up in steady orange. |
|
POWER indicator
POWER
AC IN
Connector of the power cord 
to the outlet
Please remember that when the AUTO ON function (38) activated, the connection of the power supply make the projector turn on.
WARNING ►Please use extra caution when connecting the power cord, as incorrect or faulty connections may result in fire and/or electrical shock.
•Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one.
•Only plug the power cord into an outlet rated for use with the power cord's specified voltage range. The power outlet should be close to the projector and easily accessible. Remove the power cord for complete separation.
•Never modify the power cord.
Using the security slot | Security slot |
This product has the security slot for the Kensington lock. For details, see the manual of the security tool.
WARNING ►Do not use the security slot to prevent the projector from falling down, since it is not designed for it.
NOTE • The security slot is not comprehensive theft prevention measures. It is intended to be used as supplemental theft prevention measure.
10
