Apple CPX3 Allocated to the Template function is pressed , DOT-LINE4 ó DOT-LINE3 ó DOT-LINE2

SCREEN Menu

SCREEN Menu (continued)

Item

Description

Each input port for this projector can have a name applied to it.

(1)Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► button. The SOURCE NAME menu will be displayed.

(2)Use the ▲/▼ buttons on the SOURCE NAME menu to select the port to be named and press the ► button. Right side of the menu is blank until a name is specified. The SOURCE NAME dialog will be displayed.

(3)The current name will be displayed on the first line. Use the ▲/▼/◄/► buttons and the ENTER or INPUT button to select and enter characters. The RESET button can be used to

SOURCE NAME erase 1 character at a time. The name can be a maximum of 16 characters.

(4)To change an already inserted character, press the ▲ button while the cursor is on the [A-N] row to move the cursor to the name displayed on the first line and use the ◄/► buttons to select character to be changed. Once a character in the name is selected use the ▼ button to move the cursor back down to the character entry area to select and enter characters as described above.

(5)Select and press the ENTER or INPUT buttons when finished entering text.

To revert to the previous name without saving changes press the ESC or ◄ button and the INPUT button simultaneously.

Using ▲/▼ buttons switches the mode for the template screen. The

	selected template pattern can be displayed when the MY BUTTON
TEMPLATE	allocated to the TEMPLATE function is pressed (40).
	DOT-LINE4 ó DOT-LINE3 ó DOT-LINE2
		
	TEST PATTERN ó DOT-LINE1

37