Turning Off the PIN Lock Function | Apple CPX3 instruction

OPTION Menu

OPTION Menu (continued)

Item

Description

SECURITY (continued)

3.1-2 Use the ▲/▼ buttons on the PIN LOCK on/off menu to select TURN ON and the PIN BOX will be displayed.

3.1-3 Input a 4 part PIN Code using the ▲, ▼, ◄, ►, COMPUTER and INPUT buttons.

A CONFIRMATION BOX will appear. Reenter the same PIN Code. This will complete the PIN Code registration.

•If there is no key input for about 55 seconds while the PIN BOX or the CONFIRMATION BOX are displayed the menu will close. If necessary repeat the process from 3.1-1.

Afterwards, anytime the projector is restarted after the power switch is turned off the PIN BOX will be displayed. Enter the registered PIN Code. The projector can be used after entering the registered PIN Code. If an incorrect PIN Code is input the PIN BOX will be displayed again.

If an incorrect PIN Code is input 3 times the projector will turn off. Afterwards the projector will turn off every time an incorrect PIN Code is input. The projector will also turn off if there is no key input for about 5 minutes while the PIN BOX is displayed.

This function will activate only when the projector is started after the power switch was turned off.

•Please do not forget your PIN Code.

3.2 Turning Off the PIN LOCK Function

3.2-1 Follow the procedure in 3.1-1 to display the PIN LOCK on/off menu. Use the ▲/▼ buttons to select TURN OFF and the PIN BOX will be displayed.

Enter the registered PIN Code to turn the PIN LOCK function off. If an incorrect PASSWORD is entered the menu will close.

3.3 If you have forgotten your PIN Code

3.3-1 While the PIN BOX is displayed, press and hold the RESET button for three seconds or press and hold the INPUT and ► buttons for three seconds. The 10 digit Inquiring Code will be displayed.

•If there is no key input for about 5 minutes while the Inquiring Code is displayed the projector will turn off.

3.3-2 Contact your dealer with the 10 digit Inquiring Code. Your PASSWORD will be sent after your user registration information is confirmed.

(continued on next page)

46

Image 46

Apple CPX3 manual Turning Off the PIN Lock Function, If you have forgotten your PIN Code

Contents

Thank you for purchasing this projector About this manualTrademark acknowledgment Content Fastening the lens cover Contents of packageReplacing the filter cover for bottom-up use HOT Part namesProjector 12 HOT Remote control Control panel On a horizontal surface Setting upArrangement Suspended from the ceiling Arrangement VCR/DVD player Connecting your devicesMonitor Connecting your devices About Plug-and-Play capability Using the security slot Connecting power supplySecurity slot About the remote control signal Remote controlPutting batteries Changing the frequency of remote control signal Using as a simple PC mouse & keyboard Turning off the power Power on/offTurning on the power STANDBY/ON button Power indicator Operating Adjusting the volumeSelecting an input signal Temporarily muting the sound  For a PC signal Searching an input signalSelecting an input signal  For an Hdmi signal Adjusting the zoom and focus Adjusting the projectors elevatorFocus ring Adjusting the position Using the automatic adjustment featureAuto button Correcting the keystone distortions Using the magnify featureKeystone button Freeze button Freezing the screenTemporarily blanking the screen Blank button Easy Menu Using the menu functionReset button Advanced Menu Auto Picture ModeAspect Keystone Easy Menu Light ó Dark Using the / buttons switches the gamma modePicture Menu Strong ó Weak Color Temp Using the / buttons switches the color temperature modePicture Menu Enter button, the pattern changes as below LOAD1, LOAD2, LOAD3, LOAD4 MY MemorySAVE1, SAVE2, SAVE3, SAVE4 Over Scan Image MenuPosition Image Menu PhaseAuto Adjust Size Video NR Input MenuProgressive Color Space Hdmi Input MenuVideo Format Frame Lock Resolution Setup Menu Setup Menu Standby Mode Audio VolumeAudio Menu Hdmi Audio Screen Menu Blank Start UP Screen MenuMyScreen MyScreen registration is finished Capturing error has occurred. Please try againMessage DOT-LINE4 ó DOT-LINE3 ó DOT-LINE2 TemplateAllocated to the Template function is pressed  Test Pattern ó DOT-LINE1 Auto Search Option MenuAuto on Auto OFF Option MenuLamp Time MY Source ServiceMY Button Fanspeed Ghost Filter Message Remote Freq Factory ResetKEY Lock Information Changing the Password Using Security FeaturesInputting the Password Security Turning on the MyScreen Password Using the MyScreen Password FunctionIf you have forgotten your Password Setting the Password Description Security Using the PIN Lock FunctionTurning the Password off Registering the PIN Code Turning Off the PIN Lock Function If you have forgotten your PIN Code Setting the Transition Detector Password Using the Transition Detector FunctionTurning On the Transition Detector Function Setting the Transition Detector off BOX Displaying the MY Text Using the MY Text Password functionWriting the MY Text On next Description Turning on the MY Text Password Mode Closed Caption MenuDisplay Channel Lamp MaintenanceCase of replacement by yourself Type number DT00821 Replacing the lamp Lamp warning Lamp Type number MU03602 Cleaning the air filterAir filter Filter cover Maintenance An improper signal is input TroubleshootingThere is no input signal Internal temperature is rising Regarding the indicator lamps Regarding the indicator lamps Resetting all settingsShutting the projector down Signal source does not correctly work Electrical power cord is not pluggedSignal cables are not correctly connected Input changeover settings are mismatched Not properly adjusted Color settings are not correctly adjustedColor Space setting is not suitable Play monitor Specification SpecificationsAir filter MU03602