Set Boot Partition

To set the boot partition, while in MODIFY mode:

1)If there is not already an asterisk in the boot column of the partition you want to boot from, move the cursor to that column.

2)Press <return>.

The asterisk will be removed from its current position and will appear in that column you currently have selected.

Leaving MODIFY Mode

Before Leaving

Before you leave MODIFY mode, make sure your settings are the way you want them.

◊Have you set the partition to the system you want?

◊Are the partitions you want active turned ON?...

How To Leave

To leave the MODIFY mode and return to the top of the menu, press <esc>. If you have made any changes to the partitions, you will be asked if you want to save (UPDATE) or cancel (UNDO) the modifications. (See below.)

Canceling/Saving Changes

When you leave the MODIFY mode, you’re asked if you want to UPDATE or UNDO the changes you have made.

To

Press

Save modifications

Y

 

Cancel modifications

N

Return to MODIFY mode

<esc>

Updating the changes will save the changes you have made and leave you in the main menu. You’ll need to format any modified partitions to make them useable.

Undoing the modifications will reset the partition table to the settings it had before you last entered the MODIFY mode and leave you in the main menu.

<esc> will return you to the last position you were in on the partition table with all recent modifications unchanged.

Ch. 3 - The Partition Manager

25