1)Run Backup II.

2)Insert the disk from which you want a listing into the proper floppy drive.

3)From Backup H’s main menu, press the R key on your keyboard. This selects the RESTORE FILES option.

B — BACKUP FILES

R — RESTORE FILES

Q — QUIT

PLEASE SELECT AN OPTION

4)Press L to select LIST FILES.

V - RESTORE VOLUME

P - RESTORE BY PATHNAME

L - LIST FILES

SELECT AN OPTION OR <ESC>:

5)At the LIST... prompt, type in the slot number of your floppy drive (usually “5” for 3.5” and “6” for 5.25”).

6)Now type in the drive number of your floppy drive (usually 1, however, the 3.5” drive number will be 2 if you’re booting from a RamKeeper).

LSIT THE TABLE OF CONTENTS FROM —-

(SLOT 5 DRIVE 1)

7)Select where to output the list;

◊Press <return> to send the list to the screen only

◊Press P-<return> to send the list to the printer and screen if you have a printer connected.

Restore Individual Files

If a particular file or group of files gets corrupted, lost, stolen, etc., you can restore that file or group from a backup by doing the following:

*Note: If you’re restoring a file or folder that already exists, the existing file or folder will be replaced by the restored version.

1)Run Backup II.

2)Insert the disk containing the file you’ll be restoring into the proper floppy drive.

40 Vulcan