•Note: If you don’t have a list of what files are on what disks, you can list the contents of each disk following the instructions under the Listing Files section above.

3)From Backup II’s main menu, press the R key on your keyboard. This selects the RESTORE VOLUME option.

B - BACKUP FILES

R - RESTORE FILES

Q - QUIT

PLEASE SELECT AN OPTION

4)Press P to select RESTORE BY PATHNAME.

V - RESTORE VOLUME

P - RESTORE BY PATHNAME

L - LIST FILES

SELECT AN OPTION OR <ESC>:

5)At the RESTORE FROM -- prompt, type in the slot number of your floppy drive (usually “5” for 3.5” drives.)

6)Now type in the drive number of your floppy drive (usually 1, however, the 3.5” drive number will be 2 if you’re booting from a RamKeeper).

RESTORE FROM --(SLOT 5 DRIVE 1)

7)You’ll then be given the pathname of the disk in the floppy drive, ex:

RESTORE FROM ——

(/BACKUP .VOLUME11/

8)Enter the pathname of the file or directory you want to restore, ex:

RESTORE FROM --

(/BACKUP .VOLUME11/MY.FILES

In this example, if MY.FILES was a directory, the entire directory would be restored.

9)Press <return>.

Ch. 5 - Backing Up the Vulcan

41