In addition to the
Applied Engineering offers an LED extension option. Call Æ Sales to order at (214)
If you’re so inclined, you can make an extension light to run from the connector and attach it under the front panel next to the green LED. Make sure that no wires are exposed; any exposed wires may short out the motherboard.
*Warning: Applied Engineering is not responsible for any damage resulting from modifications to your computer.
The connector is wired as follows:
Pin 1 (the right pin when facing the board from the chip side right side up) Anode of the LED
Pm 2 Cathode of the LED
With the lid off, remove the front panel by releasing the three tabs under the front edge of the computer.
Note the “pocket” in back of the clear window on the underside of the front panel where the green LED shines through. It is possible to fit an LED into this pocket.
App. D - Hardware | 51 |