■Buttons and Indicator Lights
q w e r |
| t |
|
POWER | OHP | PC1/PC2 VIDEO | SCROLL |
ON/ | |||
STANDBY |
|
|
|
LAMP/ |
|
|
|
COVER |
|
|
|
TEMP |
|
|
|
KEYSTONE MUTE | BRIGHTNESS | ZOOM | MENU |
y u i o !0 !1
Name |
| Description |
| Page to see |
q POWER Button | • | Press this button to turn the lamp on or off. |
| |
| • | Only this button can be used when the lamp is off. |
| 41 |
w TEMP LED | • | This LED blinks for ten seconds and lights when the | ||
|
| temperature inside the projector has built up. |
|
|
e LAMP/COVER LED | • | This LED lights while the lamp is on. |
| |
| • | When the lamp is turned on, it blinks for about six seconds |
| |
|
| then remains on. |
|
|
| • | When the lamp is off, it blinks for about 60 seconds then | ||
|
| remains off. |
|
|
| • This LED blinks when the lamp fails to light. (The LED |
| ||
|
| blinking pattern in this case is longer than other instances.) |
| |
| • | Blinks when the lamp usage time exceeds 1400 hours, it | ||
|
| remains on after lamp usage time exceeds 1500 hours. |
| |
| • | Lights when the air filter cover or the lamp unit cover is not | ||
|
| in place. |
|
|
r ON/STANDBY LED | • | This LED lights (red) in a standby state, and lights (green) | ||
|
| when the lamp is on. |
|
|
|
|
|
|
|
t INPUT SELECT Buttons | • | Press this button to switch the input screen. |
| |
(OHP, PC1/PC2, VIDEO) | • | When PC is selected, images from the PC input terminal |
| |
|
| are projected; when VIDEO is selected, images from the |
| |
|
| video source input terminal are projected; or, when OHP is |
| |
|
| selected, an image of the printed matter or document |
| |
|
| placed on the scanner on the main unit is projected. |
|
|
|
| Pressing on the PC1/PC2 button when PC input is selected |
| |
|
| switches between PC input 1 and PC input 2. |
|
|
|
|
|
|
|
y KEYSTONE Button | • | Press this button to compensate keystone. |
| |
u MUTE Button | • | Press to stop projecting the image without turning off the | ||
|
| lamp. Press it again and the image will reappear. |
|
|
i BRIGHTNESS Buttons | • | These buttons adjust the brightness. Pressing the | BRIGHTNESS | |
|
| button darkens the projected image, and pressing the BRIGHTNESS | ||
|
|
| ||
button lightens the projected image.