12 Main Unit Operation

RESIZE

Remote Control Operation

RESIZE

13 Main Unit Operation

LIVE

IMAGE

Remote Control Operation

LIVE IMAGE

Basic Operation

Project a full-screen image.

When projecting a vertical image, press the RESIZE button to switch between a projected image that fills the screen from side to side or to one that fills the screen from top to bottom. (You can switch them even when adjusting the zoom.)

Make the projected image live.

There are the two following methods to move the document while checking the projected image.

qMake the window live.

Set “Window” in “Movie mode” in the quick menu (page E- 51). Pressing the LIVE IMAGE button displays live images

in the window on the bottom right of the image.

wMake the entire image live.

Set “Full” in “Movie mode” in the quick menu (page E-51). Pressing the LIVE IMAGE button displays live images on the entire projected image at about 1 frame per second. In this setting, the image doesn't change even if you press the LIVE button.

14 Main Unit Operation

OHP STORED

IMAGE

VOLUME

Remote Control Operation

OHP STORED IMAGE

NOTE

View OHP STORED IMAGE.

When you press the REFRESH button and the image freezes, a maximum of eight pages of the OHP images are stored on the internal MP-50E memory.

Press the OHP STORED IMAGE button to view and change the stored images on the internal memory. See page E-40 for details.

button: Display the image previous to the currently displayed image from stored image.

button: Display the image following the currently displayed image from stored image.

You can switch the stored images from the quick menu (page E-51) when viewing the OHP stored image.

•Pressing the POWER button and going into standby erases the OHP stored images.

•The brightness can not be adjusted when viewing OHP stored image. Adjust the brightness before pressing the REFRESH/FREEZE button.

E-33