Part Names and Functions

Part Names and Functions

Projector

Handle

■Extended

Press lightly on the left side of the handle and it rotates 180˚ and comes out.

Remote Control

Sensor

■Retracted

Rotate the handle while pressing on its right side to store it.

Materials Cover

The scanner and printed matter is located under this cover.

See page E-31.

Operation panel

Buttons for operating the projector are located here.

See page E-12.

Speakers

Air Vent A (air filter) (side of main unit)

Air is taken in through this vent. An air filter is provided to prevent dust from getting inside the projector.

See page E-56.

Adjustable Feet

Focus adjuster

Turn this to adjust the focus.

See page E-30.

Projection Lens

Images are projected through this lens.

*Be sure to remove the lens cap when projecting images.

Lens cap

Zoom lever

Turn this ring to adjust the screen size.

See page E-30.

Anti-theft Lock

See the NOTE below.

Tilt Adjustment Buttons

Press this to adjust the adjustable feet. See page E-18.

Adjustable Feet

These feet are for adjusting the tilt angle as well as the left and right balance of the projected image. Turning them counterclockwise raises the main unit, and turning them clockwise lowers the main unit.

See page E-18.

NOTE

About the anti-theft lock

7mm

3mm

The anti-theft lock is compatible with Kensington security cable lock. Contact the following for more information about the products.

Kensington Technology Group 2000 Alameda de las Pulgas Second Floor

San Mateo, California 94403-1289, U.S.A. Phone: (650) 572-2700

Fax: (650) 572-9675

URL: http://www.kensington.com

E-9