Basic Operation
Basic Operation
■Preparation
2
1 1
1 | Connect the power cord. |
ON/
STANDBY
LAMP/
COVER
TEMP
NOTE
The projector is in the standby mode, and the power indicator LED lights (red).
Press the POWER button. The fan spins, the LED lights, and the ON/STANDBY LED lights (green).
The LAMP/COVER LED lights (green).
If the LAMP/COVER LED lights red after turning on the POWER button, then there is something wrong. (See page E- 52 for details.)
Make sure that the lens cap has been removed before turning on the power.
2 Main Unit Operation
OHP PC1/PC2 
VIDEO
Remote Control Operation
OHP
PC1/PC2
VIDEO
Select the external input device.
Select the video source to be displayed from OHP, PC1/PC2, or VIDEO.
The selected input display is displayed.
OHPPC/video
See page | See page |
NOTE
When PC/VIDEO is selected and the device is not connected, or the connected device is not turned on, “No input” is displayed.