●Basic connections

To RGB output

To analog RGB

connector on PC

connector on monitor

 

The connector cable model No. differs according to the type of PC.

To audio output terminal on PC

Fix the connector cable using the screw-in fasteners.

To speaker input

terminals

Terminal panel on the back of the MP-50E main unit

NOTE

•The personal computer has input terminals for both image and sound for “1” and “2”. Hook up the sound and image to the corresponding terminals. If they are not hooked up to the corresponding terminals, the image and sound will not be output correctly.

•See page E-11 for information about the input and output terminals.

●Connecting to IBM NOTE and Compatible

Signal cable (supplied)

To RGB-IN1 or RGB-IN2 terminal

MP-50E

NOTE

After you have connected the supplied cable, check the external CRT output/internal LCD output states and set the mode in the software running on the PC.

The connection with the PC will not be made if you do not set the external CRT output mode.

E-26