12 Remote Control Operation | Display images from the personal computer |
| and the video at the same time. |
P in P
NOTE
If you select personal computer input while a video source and a personal computer are both connected, you can display video images in the window at the lower right side of the projected image. Set “Picture in Picture” to “ON” on the quick menu to display video images. See page
•The P in P button is only enabled when a personal computer is selected. You can not use it when video is selected.
•You can not use the picture in picture function if the signal from the personal computer is not being input.
13 Main Unit Operation
MUTE
Remote Control Operation
MUTE
NOTE
Mute the image.
Press the MUTE button to stop projecting the image without turning off the lamp. You can select the image projected while the image is muted from the following two images.
qProject a completely black image while the projected image is muted.
Set “Black” in “Mute mode” on the “Setting 2” menu (page
icon is displayed on the top right side of the projected image.
wProject an arbitrary image while the projected image is muted.
Set “logo” in “Mute mode” on the “Setting 2” menu (page E-
45).
While the image is muted, the projecting image 
icon is displayed on the top right side of the projected image.
After the projected image has been muted for a certain amount of time (about 15 minutes) it automatically goes into standby.