How to Install the Projector
■Compensating Keystone
If the projected image is distorted, you can eliminate the distortion by doing keystone compensation.
●How to Compensate Keystone
Press the | KEYSTONE |
button (or the KEYSTONE button on the |
remote controller) to display the “Keystone menu.”
Key s t o n e
H o r i zo n t a l | 0 |
Ver t i c a l | 0 |
M E N U | Set standard |
S E T | Quit |
Keystone menu
Press the u button to make the top of the projected image narrower.
Press the | u | button to make the |
bottom of the projected image narrower.
Press the v button to make the left side of the projected image narrower.
Press the u button to make the right side of the projected image narrower.
MENU
MENU
Press the 
button (or the 
button on the remote controller) to return to “0” (No compensation).
NOTE
•When keystone compensation is performed, the resolution at the edges of the projected image is reduced, making small characters difficult to read. To prevent this, place the projector on as level a surface as possible, and set the Keystone menu to “0” (No compensation).
•As image processing is performed for keystone compensation, displayed images (characters, etc.) are displayed slightly blurred when keystone compensation is used compared with when it is not used.
•When displaying an image with VGA resolution less than 640 x 480 pixels with a excessive horizontal keystone compensation may cause parts of the image to become fuzzy. See page
•The degree to which keystone compensation can be adjusted depends on the image signal.
•If the horizontal value is adjusted to its largest (or smallest) the vertical adjustment value can not be moved in the plus
direction when doing keystone compensation.