How to Install the Projector
■Installation Sequence
Check the |
|
| Install the input | End | |
installation site | Prepare the screen. | Install the projector. | |||
devices. | |||||
and image size. |
|
|
| ||
|
|
|
| ||
See “Projection Distance and |
|
| PC, video source, etc. |
| |
Projected Image Size” on page |
|
|
| ||
■Adjusting the Tilt
The position and tilt angle of the projected image can be adjusted by adjusting the adjustable feet. Press both the left and right tilt adjustment levers to lift the main unit, and release them when the desired height is reached. You can
Tilt adjust levers
Extends | Retracts |
foot. | foot. |
Retracts | Extends | Adjustable feet |
foot. | foot. |
|
CAUTION
•Do not tilt the main unit at extreme angles by turning only one side of the adjustable feet. Doing so may cause the main unit to slip or fall down, resulting in accidents or failures.
•Vent A on the bottom of the main unit takes in air to cool the inside of the projector. As air is taken in by large suction force, cloth or paper may be sucked in against the vent. If this happens, the temperature inside may build up, and cause an accident or failure.
•The rubber feet may soil the installation surface depending on where the projector is installed.