ASSEMBLY

WARNING: AVOID INJURY. Read and understand the entire Safety section before proceeding.

WARNING: Dropping or tipping over boxed unit could result in personal injury or damage to unit.

PACKAGE CONTENTS

4 1

Unfold Handlebar (Figure 4)

1.Remove the lower and loosen the upper wing knobs on the handlebar assembly.

2.Loosen the wing nuts on the shift rod.

3.Put the speed selector lever in the first forward position.

4.Rotate the handlebars into operating position.

5.Install and tighten all wing knobs and wing nuts on the handlebar assembly and shift rod.

NOTE: The handlebar has two height positions. Adjust the handlebar height to provide better operator comfort. See Handlebar Height on page 22.

5

4

1

3

 

2

 

OS7020

1. Sno-Thro Unit

4. Literature Pack with

2. Discharge Chute

Extra Shear Bolts

3. Chute Rod

 

Figure 3

ASSEMBLY

Tools Required:

•Pliers

•Open-End Wrenches: 3/8, 7/16, 1/2, 9/16 in. and/or Adjustable Wrench

•Tire Gauge

1

2, 3

1. Wing Knobs

4. Shift Rod

 

2. Wing Nut

5. Speed Selector

 

3. Bolt

Lever

 

Figure 4

OS7030

GB - 9