22
AQUA PURE WATER SYSTEM (cont’d)- Turn the “DECREASE/INCREASE” dial to the right until
the LED display (to the left of the dial) reads “10”. This will
initiate the buildup of a bromine bank.
- Monitor the bromine level until it is within the range indi-
cated on the test strip. Once the desired level has been
achieved, turn the “INCREASE/DECREASE” dial until the
LED display reads “5”. This is a good starting point to set
your bromine production level. The appropriate setting for
your Aqua Pure Water System will depend on how often
you use your spa. Aspa with a higher-than-average bather
load will require a higher setting. This will allow the Aqua
Pure Water System to produce more bromine to maintain
the level required.
Note: It can take several days for the bromine level to stabilize
because the water that you put into your spa contains impurities
that need to be neutralized, thereby using up the initial bromine
that is generated. You can expedite this process by shocking the
water with a non-chlorine product.