ELECTRICAL CONNECTION

WARNING

Electrical codes change from Province to Province. Check with your electrician for the electrical codes in your area.

A certified electrician must make all electrical connections to your spa, in accordance with all applicable electrical codes for your area. The spa’s GFCI breaker must be sized in accor- dance to electrical requirements of the spa. The Full Load Amperage (FLA) is recorded on the spa’s nameplate.

WARNING

Failure to use a GFCI breaker for electrical connection to your spa could result in seri- ous harm or death. No electrical power should be available near the spa without GFCI protection.

ELECTRICAL CONNECTION ACCESS

To access Electrical connections:

Electrical connections are within the spa pack. There are 2 wire access locations, one on each side of the front panel. The electrical requirements are 220V with a neutral.

L2

N

GND

L1

IMPORTANT SAFETY INSTRUCTIONS

1.Read and follow all instructions.

2.A ground terminal is located on the power connection ter- minal block. To reduce the risk of electric shock this terminal must be connected to the grounding means provided in the

electric supply service panel with a

9

Page 10
Image 10
Aruba Spa Hot Tub Models 2003 owner manual Electrical Connection Access, Important Safety Instructions