Asoka PL9920-BBR specifications Asoka PlugLink PL Cable/DSL Router Manual

Asoka™ PlugLink™ PL Cable/DSL Router Manual

Reset System Setting to Factory Default

Resets all settings back to the original state of the router. This will clear all settings you might have previously inputted to the router and will restore the router WAN IP address back to 192.168.8.1 and Subnet Mask to 255.255.255.0.

Backup System Setting

Save the current setting on the router to a file on a computer or floppy disk. This is a great tool to have so that you can restore the router’s system set- ting quickly.

Restore System Setting to the Previous Setting

Revert back to the previous version of setting on the router.

Change Login Password

Change the login password on the web setup interface via 192.168.8.1.

Upgrade Firmware

Update your firmware on the router. Most current version of the firmware can be found on web site www.asokausa.com.

View Event Log

View entries or event happening at router WAN port.

20