2.5.13 RADIUS Settings
To enable/disable RADIUS, check or uncheck the “RADIUS Authentication” Enable checkbox respectively.
NOTE: Generic FreeRADIUS alone is supported.
RADIUS Authentication
Check the option ‘Enable’ to enable RADIUS authentication.
Port
Specify the RADIUS Port.
•- The default Port is 1812.
•- Port value ranges from 1 to 65535.
Time Out
Specify the Time out value.
•- The default Time out value is 3 seconds.
•- Time out value ranges from 3 to 300.
Server Address
Enter the ‘IP address’ of the RADIUS server
•- An IP Address is made of 4 numbers separated by dots as in “xxx.xxx.xxx.xxx”.
35
