2.9.2 Image Transfer Protocol
This page is used to configure the firmware image protocol information.
Protocol Type
Protocol type to transfer the firmware image into the BMC.
Server Address
The Server IP address of the firmware image is stored.
•- An IP Address is made of 4 numbers separated by dots as in “xxx.xxx.xxx.xxx”.
•- Each number ranges from 0 to 255.
•- The first number must not be 0.
Source Path
Full Source path with filename of where the firmware image is stored.
Retry Count
Number of time(s) to be retried when transfer failure occurs. Retry count ranges from 0 to 255.
Save
Click ‘Save’ to save the configured settings.
58
