ASRock WiFi Motherboard K10N780SLIX3 manual English

Step 3. Reverse the card direction so as to have the “X16 MODE” wording side toward

the retention slot base. Insert the card into the bottom of the base.

Step 4. Push the card down into the retention slot till both the retention arms firmly hold the card into position. Also, keep away from touching the connectors (Golden Fingers).

Step 5. Install the identical SLITM-ready graphics cards that are NVIDIA® certified be- cause different types of graphics cards will not work together properly. (Even the GPU chips version shall be the same.) Insert one graphics card into PCIE1 slot and another graphics card to PCIE2 slot. Make sure that the cards are properly seated on the slots.

Step 6. If required, connect the auxiliary power source to the PCI Express graphics cards.

Step 7. Align and insert the SLI Bridge to the goldfingers on each graphics card. Make sure that the SLI Bridge is firmly in place.

English

Step 8. Connect a VGA cable or a DVI cable to the monitor connector or the DVI connector of the graphics card that is inserted to PCIE1 slot.

1 9

ASRock K10N780SLIX3-WiFiMotherboard