ASRock WiFi Motherboard K10N780SLIX3 manual English Installing Three SLITM-Ready Graphics Cards

English

2.5.1.2 Installing Three SLITM-Ready Graphics Cards

Step 1. Install the identical 3-Way SLITM-ready graphics cards that are NVIDIA® certi- fied because different types of graphics cards will not work together properly. (Even the GPU chips version shall be the same.) Each graphics card should have two goldfingers for the 3-Way SLI Bridge connector. Insert one graphics card into PCIE1 slot, another graphics card to PCIE2 slot, and the other graph- ics card to PCIE4 slot. Make sure that the cards are properly seated on the slots.

Two Goldfingers

Step 2. Connect the auxiliary power source to the PCI Express graphics card. Please make sure that both power connectors on the PCI Express graphics card are connected. Repeat this step on the three graphics cards.

Step 3. Align and insert the 3-Way SLI Bridge to the goldfingers on each graphics card. Make sure that the 3-Way SLI Bridge is firmly in place.

Step 4. Connect a VGA cable or a DVI cable to the monitor connector or the DVI connector of the graphics card that is inserted to PCIE1 slot.

2 0

ASRock K10N780SLIX3-WiFiMotherboard