ASRock WiFi Motherboard K10N780SLIX3 manual Hdmispdif Cable, Black end, Hdmispdif cable to

HDMI_SPDIF Cable

(Optional)

A. black end

	Please connect the black end (A)
C	of HDMI_SPDIF cable to the

BHDMI_SPDIF header on the

Amotherboard. Then connect the white end (B or C) of HDMI_SPDIF cable to the HDMI_SPDIF connector of HDMI VGA card.

B. white end (2-pin) C. white end (3-pin)

English

2.9 HDMI_SPDIF Header Connection Guide

HDMI (High-Definition Multi-media Interface) is an all-digital audio/video specification, which provides an interface between any compatible digital audio/video source, such as a set-top box, DVD player, A/V receiver and a compatible digital audio or video monitor, such as a digital television (DTV). This motherboard is equipped with a HDMI_SPDIF header, which provides SPDIF audio output to HDMI VGA card, allows the system to connect HDMI Digital TV/projector/LCD devices. To use HDMI function on this motherboard, please refer to page 36 of “User Manual” in the support CD for detailed installation procedures.

2.10 eSATAII Interface Introduction

NOTE:

1.If you set “SATA Operation Mode” option in BIOS setup to AHCI or RAID mode, Hot Plug function is supported with eSATAII devices. Therefore, you can insert or remove your eSATAII devices to the eSATAII ports while the system is power-on and in working condition.

2.If you set “SATA Operation Mode” option in BIOS setup to non-RAID mode, Hot Plug function is not supported with eSATAII devices. If you still want to use eSATAII function in non-RAID mode, please insert or remove your eSATAII devices to the eSATAII ports only when the system is power-off.

3.If you want to use the eSATAII HDD as an OS disk, please set “SATA Operation Mode” option in BIOS setup to non-RAID mode. If you want to use the eSATAII HDD as a removable data disk, please set “SATA Operation Mode” option in BIOS setup to RAID mode. If you want to add the eSATAII HDD as a RAID disk, please set “SATA Operation Mode” option in BIOS setup to RAID mode.

4.Please do not configure your eSATAII HDD as a RAID disk; otherwise, it may affect the Hot Plug function that eSATAII HDD should have.

5.Please refer to page 32 to 34 for detailed information of RAID mode, non-RAID mode and AHCI mode.

3 0

ASRock K10N780SLIX3-WiFiMotherboard