NOTE Remove the car holder and take the device with you when you leave the car.

Gently bend the gooseneck when adjusting the orientation. Do not forcibly bend the gooseneck. The device must be carefully placed into the holder to avoid damaging the mini USB connector and causing the device to breakdown.

Additional storage

MyPal A626/A686/A696 comes with the standard SD card slot. The SD card slot can be inserted with SD or MMC memory cards. It also supports SDIO cards of various functionalities including 802.11b/g, modem, etc.

Installing and removing SD/ MMC/SDIO card

1.With the label side (usually the side with the card manufacturer’s name) face up, and the barcode/serial number side face down, insert the card into the SD card slot located on top of the device.

2.Push the card all the way into the slot until it fits completely. If properly installed, the SD or MMC card edge aligns with the top edge of the device. SDIO cards usually have an extended part that protrudes over the slot edge.

3.To remove, press the card slightly until it ejects out. You may then safely remove the card.

NOTE An SD/MMC/SDIO/ card fits only in one orientation, and slides smoothly into the slot if inserted correctly. DO NOT force the card into the slot!

Label

Getting Started

Page 13
Image 13
Asus A626, A696, A686 user manual Additional storage, Installing and removing SD/ MMC/SDIO card