![](/images/backgrounds/166785/166785-11020x1.png)
Before you proceed, make sure that you have all the components you plan to install in the system.
Basic components to install
1.Central processing unit (CPU)
2.DDR Dual Inline Memory Module (DIMM)
3.Expansion card(s)
4.Hard disk drive
5.Optical drive
6.Floppy disk drive
Tool
Phillips (cross) screw driver
2.2Before you proceedTake note of the following precautions before you install components into the system.
•Use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, before handling components to avoid damaging them due to static electricity.
•Hold components by the edges to avoid touching the ICs on them.
•Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component.
The motherboard comes with an onboard standby power LED. This LED lights up to indicate that the system is ON, in sleep mode or in
ÆSB_PWR
| ON | OFF |
Onboard LED | Standby | Powered |
Power | Off |
2 - 2 | Chapter 2: Basic installation |