6.Reinstall the tray and the HDD to the chassis by locking the

tray slots to the chassis hooks.

7. Secure the tray with the screw

 

you removed earlier.

6

 

7

8.Connect one end of the 40-pin IDE cable to the IDE connector

on the drive.

9. Connect a 4-pin power plug from the power supply unit to the HDD power connector. See page 2-24 for details on the power supply unit plugs.

10. Connect the other end of the IDE ribbon cable to the primary IDE connector (blue connector labeled PRI_IDE) on the motherboard. See page 4-6 for the location of the primary IDE connector.

8

9

ASUS T2-PE1

2 - 21