![](/images/backgrounds/166785/166785-11036x1.png)
13.Reinstall the front panel cover by aligning its hooks with the
chassis holes.
14.Lock the front panel cover hooks to the chassis holes as indicated.
To install a Serial ATA optical drive:
1.Follow steps 1 ~ 7 of the previous section “To install an
IDE optical drive.”
2.Connect one end of the Serial ATA cable to the Serial ATA
interface at the back of the optical drive. Connect the other
13
14
2
end to a Serial ATA connector on the motherboard. See page
3
3.Connect a Serial ATA power cable from the power supply unit to the Serial ATA power connector at the back of the drive. See page
2 - 18 | Chapter 2: Basic installation |