Northbridge Configuration

BIOS SETUP UTILITY

Advanced

Memory Reference Code (MRC) Version 5.1

Boot Graphics

Adapter

Priority

[PEG/IGD]

UMA

Frame Buffer size

 

[64 MB]

Surround View

Function

[Disabled]

DDR

Voltage

 

 

[2.65V]

Memory Timing

 

 

[Auto]

Select which graphics controller to use as primary boot device.

Select Screen

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.

Boot Graphics Adapter Priority [PEG/IGD]

Allows selection of the graphics controller to use as a primary boot device. Configuration options: [IGD] [PEG/IGD] [PCI/IGD]

UMA Frame Buffer Size [64 MB]

Sets the UMA frame buffer size

Configuration options: [32 MB] [64 MB] [128 MB]

DDR Voltage [2.65V]

Allows you to manually set the memory voltage. Configuration options: [2.94V] [2.85V] [2.73V] [2.65V]

Memory Timing [Auto]

Allows you to set the memory timing manually, or allows the BIOS to configure it automatically. Configuration options: [Auto] [Manual]

The following items appear if the Memory Timing item is set to [Manual].

CAS Timing [Disabled]

Configuration options: [Disabled] [1 Clock] [1.5 Clocks] [2 Clocks] [2.5 Clocks] [3 Clocks] [3.5 Clocks] [4 Clocks]

Cycle Time (TRAS) [8 CLOCKS]

Allows you to set the cycle time. Use the <+> or <-> key to set the value. Valid values: [0 CLOCK] [2 CLOCKS] [3 CLOCKS]...

[8 CLOCKS]

5 - 20

Chapter 5: BIOS setup