Asus T2-PE1 •Power button (1-pinPWRBTN), •System power LED (2-pinPLED+, PLED-), •Hard disk drive activity (1-pinHDLED), 12 . System panel connector (8-1pin PANEL)

12 . System panel connector (8-1 pin PANEL)

This connector accommodates several system front panel functions.

§

System panel connector

CON1		IEEE1394+12V	1394TPA1+	1394TPA1-	1394TPB1+	1394TPB1- IEEE1394GND	USB6+ USB6- USBGND USB7+ USB7- USBGND	PWRBTN#	HDLED-	+5VSB	GND
	1
		IEEE1394 GND	1394 TPA0+	1394 TPA0-	1394 TPB0+	1394 TPB0- USB4 5 +5V	USB4+ USB4- USB GND USB5+ USB5- USB7 8 +5V		PLED-	+5V	P LED+

•IEEE 1394 connectors (5-pin 1394, 6-pin IEEE1394)

These connectors are for the IEEE 1394a connectors on the front panel I/O daughterboard to support the front panel IEEE 1394a ports.

•USB 2.0 connectors (6-pin USB4_5, 7-pin USB6_7)

USB4/5 connects to the front I/O
boarde (T2-IO). You can connect
the internal USB devices to these
connectors. Refer to the front I/O	USB1
board pin definition on the right.
	USB4_5 +5V	USB4_5 +5V
USB6 and USB7 are for the user’s	USB4-	USB5-
	USB4+	USB5+
USB devices.	USB GND	USB GND
		+5V

PWRBTN#

•System power LED (2-pin PLED+, PLED-)

This 2-pin connector is for the system power LED. The system power LED lights up when you turn on the system power, and blinks when the system is in sleep mode.

•Hard disk drive activity (1-pin HDLED)

This connector is for the HDD Activity LED. The IDE LED lights up or flashes when data is read from or written to the HDD.

•Power button (1-pin PWRBTN)

This connector is for the system power button. Pressing the power button turns the system ON or puts the system in SLEEP or SOFT-OFF mode depending on the BIOS settings.

ASUS T2-PE1 4 - 9