2.11Reinstalling the power supply unit

Reinstall the power supply unit (PSU) after installing the system components and reconnecting the cables, .

To reinstall the PSU:

1.Connect the two 4-pin 12 V power plugs to the ATX12V1 and ATX12V2 connectors on the motherboard. See page 4-6 for the location of these connectors.

2.Connect the 24-pin ATX power plug to the EATXPWR connector on the motherboard. See page 4-6 for the location of this connector.

3.Position the PSU over the chassis.

2

1 1

4. Align the PSU side hook with the metal slot located on the side of the optical drive bay.

4 3

5. Slide the PSU toward the direction of the rear panel until it fits in place.

5

6.Secure the PSU with the screw you removed earlier.

Make sure the PSU cables do

7

not interfere with the CPU

 

and/or chassis fans.

6

 

ASUS T2-PE1

2 - 23