FEATURE SUMMARY | Default settings indicated by *. |
SYSTEM ANNOUNCES: | DESCRIPTION/DIRECTIONS: |
|
|
“Change remote access code” Set the remote access code you
50*will use to access features and functions of the answering system from a touch tone phone.
“Change clock” | Set the day and time. After you |
Monday, 12:00 AM* | set the day, repeat Steps 3 and 4 in |
| “Answering System Feature Setup” on |
| page 43 to set the hour and |
| minutes. |
|
|
“Change message alert” | When Message Alert is turned on, |
Off * | the base beeps once every 10 |
On | seconds when new messages have |
| been received. |
|
|
“Change announce only” | When you turn Announce Only |
Off * | on, callers hear your |
On | announcement but cannot leave a |
| message. |
|
|
“Change number of rings” | Choose how many times the |
2 | phone will ring before the system |
4 * | answers a call. With Toll Saver |
6 | active, the system answers after Toll |
| Saver two rings when you have new |
| messages and after four rings when |
| you have no new messages. |
|
|
“Change call screening” | When you turn Call Screening |
On* | off, you will not hear incoming |
Off | messages as the caller leaves them. |
|
|
NOTE: Exit Feature Setup at any time by pressing a MAILBOX/STOP button.
ANSWERING SYSTEM OPERATION
45
