PROGRAMMING CODES FOR CUSTOM FEATURES
|
| Custom | Dial This | Suggested |
|
| Feature | Information | Button Label |
|
|
|
|
|
|
| Intercom Auto Dial | ✱ 6 + lnter- | Person’s Name |
|
|
| com Code |
|
|
|
|
|
|
|
| Outside Auto Dial | ✱ 90 + out- | Person’s Name or Telephone |
|
|
| side Number | Number |
|
|
|
| |
|
|
| mum) |
|
|
|
|
|
|
|
| Primary Cover | ✱ 4 + lnter- | Person’s Name or Location |
|
|
| com Code |
|
|
|
|
|
|
|
| Secondary Cover | ✱ 5 + lnter- | Person’s Name or Location |
|
|
| com Code |
|
|
|
|
|
|
|
| Loudspeaker Paging | ✱ 680 | Page All |
|
|
|
|
|
|
| Page Zone 1 | ✱ 681 | Page Zone 1 |
|
|
|
|
|
|
| Page Zone 2 | ✱ 682 | Page Zone 2 |
|
|
|
|
|
|
| Page Zone 3 | ✱ 683 | Page Zone 3 |
|
|
|
|
|
USING PAUSE, STOP, AND FLASH FOR OUTSIDE AUTO DIAL BUTTONS
An Outside Auto Dial button can store up to sixteen digits. For some types of calls, though, you need to program an automatic pause, stop, or switchhook flash with the number. For example, if your MERLIN system will be working in combination with a PBX system where you have to dial 9 to get an outside line, you must program a pause after the 9 on your MERLIN system Outside Auto Dial button. Or, when you dial an additional long distance service sequence or call in a credit card authoriza- tion code, you need to program an automatic stop.
Follow these steps to program a pause for PBX systems:
1.Label the button.
2.Set the voice terminal to program mode by following the boxed instructions on page 30.
3.Touch the button you want for Outside Auto Dial.
4.Dial ✱ 90.
5.Dial 9.
6.Touch Hold (pause) to program the
7.Dial the outside number you want the button to represent.
8.Slide the T/P switch to the center position to return to normal operation.
34
