Features
Hold
Use Hold to leave a call temporarily and take a second call or to use other features (for example, to set up a conference call or start a transfer).
If you want to put a call on hold and hang up so you can pick it u later, use Park instead of Hold. (See Park.)
Using Hold
1.To put a call on hold, press and release the Recall or
Flash button or the switchhook.
You hear a dial tone. You can now dial another call or use a feature.
2.To return to the call on hold, do one of the following: Press and release the Recall or Flash button or the switchhook again.
Hang up, then lift the handset again and dial
#✱✱
If you do not return to the held call, it may ring back at your phone after a length of time that depends on how your system is set up.
