Troubleshooting
Corrective procedures (continued from previous page)
Set Windows® to This procedure allows your computer to automatically detect IP automatically detect IP settings settings, which may allow you to connect to the Internet.
Consult your network administrator If your computer is new, it may not have an IP address, which before attempting this change. is required for Internet access. If you do not need a static IP
address for some special purpose, you can set your computer to automatically detect the IP settings (see steps
If your network uses static IP addresses, you should not follow the procedure below. You will have to enter the IP address assigned to you by your service provider.
If you use this computer on another network (perhaps at your workplace), you should consult a technician familiar with the network before attempting this change.
Record all settings before changing them in case you need to restore them later.
1Start Internet Explorer®. Whether you can connect to the Internet or not, the browser screen will appear.
2Select Tools.
3Select Internet Options from the dropdown menu.
4Select Connections.
5Select LAN Settings.
6Select Automatically detect settings.
If you still have difficulty operating this product, or if you need more information or help, please visit our website at
www.plugandshare.att.com
or call our Customer Service Center at
AT&T Plug&Share™ 54 Mbps Wireless Router 6800G | 70 |
