Getting started
Installation options
4.Push the two tabs at the bottom of the wall mount bracket as indicated and remove the wall mount bracket from the telephone.
5.Plug one end of the telephone line cord into the telephone line jack on the bottom of the telephone base. Plug the other end into a telephone wall jack or a DSL filter. Plug the small end of the power adapter into the power jack on the bottom of the telephone base. Plug the large end into an electrical outlet not controlled by a wall switch. Route both cords through the slots.
Electrical outlet not controlled by a wall switch
Telephone wall jack
DSL filter (not included)
is required if you
have DSL high-speed Internet service.
Route the power adapter cord and the telephone line cord through the slots.
6. Adjust the screen angle for maximum visibility.
