Getting started
Installation options
3.Plug one end of the telephone line cord into the telephone line jack on the bottom of the telephone base. Plug the other end into a telephone wall jack or a DSL filter. Bundle the telephone line cord and secure it with a twist tie.
4.Plug the small end of the power adapter into the power jack on the bottom of the telephone base. Route the power adapter cord through the slot. Plug the large end into an electrical outlet not controlled by a wall switch.
Electrical outlet not controlled by a wall switch
Route the power adapter cord through the slot.
Telephone wall jack
DSL filter (not included) is required if you have DSL
5.Place the telephone just above the studs on the wall mounting plate. Slide the telephone down until it is held securely on the wall mounting plate. Place the handset on the telephone base.
6. Adjust the screen angle for maximum visibility.
