AT&T MLS-12DTM, MLS-12TM, MLS-6TM manual Personal Speed Dial Numbers

Personal Speed Dial

Numbers

Description: You can program up to 20 frequently dialed numbers for each extension. The user can then dial these numbers by pressing [ Feature ] and the 2-digit code you assign the number during programming. Personal Speed Dial numbers do not override other restrictions assigned to an extension.

Valid Entries: Any phone number (up to 20 digits) assigned codes 80 through 99

✓No number assigned to any code

Considerations: You cannot program a Personal Speed Dial code onto a but- ton.

Programming Notes: If you program emergency numbers as Personal Speed Dial numbers, follow these guidelines when testing them:

1.Remain on the line and briefly explain to the dispatcher the reason for the call before hanging up.

2.Perform such activities in the off-peak hours, such as early morning or late evening.

Programming Steps:

1.Press [ Feature ][ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Prog ]. The display reads:

CENTRAL TEL PROG

Extension:

2.Enter the extension to be programmed. For example, to select extension 17, press [ 1 ] [ 7 ]. The display reads:

PROGRAM EXT 17

3. Enter the 2-digit code you want to assign the phone number by pressing

[ Feature ] and 2 digits between 80 and 99. For example, to assign code 80, press [ Feature ] [ 8 ] [ 0 ]. If a number is already assigned to the code, it appears in the display. If no number is assigned to the code, the display reads:

Blank

4.Enter the phone number according to the instructions given for System Speed Dial numbers on p. 3-34.

To program another feature on this extension, go to step 3 for that feature.

✓= Factory Setting

To program another extension, press [ Central Tel Prog ] and continue from step 2. To go to system programming mode, press [ Central Tel Prog ] [ System Program ].

To exit centralized telephone programming, press [Feature ] [ [ 0 ] [ 0 ].

Centralized Telephone Programming 4-5