Loudspeaker
Paging
Calling Group
Description: If the system has a loudspeaker paging system, this feature activates it. By programming this feature on a button, the user can activate the loudspeaker with one touch.
Programming Steps:
1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Prog ]. The display reads:
CENTRAL TEL PROG
Extension:
2.Enter the extension to be programmed. For example, to program exten- sion 28, press [ 2 ] [ 8 ] . The display reads:
PROGRAM EXT 28
3.Select a button to program by pressing any programmable button.
4.Press the left [ Intercom ] button, followed by [ 7 ] [ 0 ] . The display reads:
Loudspeaker Page
To program another feature on this extension, go to step 3 for that feature.
Description: Enables the user to simultaneously call all the extensions in the Calling Group. By programming this feature on a button, the user can call the group with one touch. The Calling Group is assigned through system program- ming procedure #502.
Programming Steps:
1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Prog ]. The display reads:
CENTRAL TEL PROG
Extension:
2.Enter the extension to be programmed. For example, to program exten- sion 14, press [ 1 ] [ 4 ] . The display reads:
PROGRAM EXT 14
3.Select a button to program by pressing any programmable button.
4.Press the left [ Intercom ] button, followed by [ 7 ] [ 1 ] . The display reads:
Calling Group
To program another feature on this extension, go to step 3 for that feature.
To erase a button setting, press the button to be erased and [ Mic ].
To program another extension, press [ Central Tel Prog ] and continue from step 2. To go to system programming mode, press [ Central Tel Prog ] [ System Program ]. To exit centralized telephone , press [ F e a t u r e ] [ 0 ] [ 0 ] .
Centralized Telephone Programming
