AT&T MLS-12TM System Programming, To Enter Program Mode, DIAL ITS 3-DIGIT CODE, = Factory Setting

SYSTEM PROGRAMMING

TO ENTER PROGRAM MODE	TO GO TO A PARTICULAR PROCEDURE
Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ]	DIAL ITS 3-DIGIT CODE
TO CYCLE THROUGH THE PROCEDURES	Example: [ # ] [ 1 ] [ 0 ] [ 1 ]
Press [ Next Proc ] or [ Prev Proc ]

TO RETURN DATA TO FACTORY SETTlNG: Press [ Remove ]

TO LEAVE SYSTEM PROGRAM MODE: Press [ Feature ] [ 0 ] [ 0 ]

I

✓= Factory Setting

*NOTE: Procedure #104 is a “shortcut” procedure that assigns all extensions and changes the following procedures to their factory settings: Line Type (#202), Hold Disconnect Time (#203), Automatic Line Selection, and Line Ringing Options. To change line assignments without affecting other settings, use Line Assignment (#301).

SYSTEM DATE (p. 3-4)

DIAL #101

DIAL the date inMMDDY form

SYSTEM DAY (p. 3-4)

DIAL #102

DIAL 1 = Sunday 3

2 = Monday

3 = Tuesday

4 = Wednesday

5 = Thursday

6 = Friday

7 = Saturday

SYSTEM TIME (p. 3-5)

DIAL #103

DIAL the date in hhmm form Use 24-hour, military-style notation

NUMBER OF LINES (p. 3-5)*

DIAL #104

Dial one digit for the number of out-

side lines in the sustem (0 to 8) ( ✓ = 2 per 206 module)

TRANSFER RETURN RINGS (p. 3-6)

DIAL #105

DIAL one digit for the number of rings before a transferred call returns to the originator (0 to 9) (✓ = 4)

PBX DIAL-OUT CODE (p. 3-6)

DIAL #106

DIAL the digit for the code needed to reach a PBX or Centrex (0 to 9) ( ✓ = 9)

RECALL TIMER DURATION (p. 3-7)

DIAL #107

DIAL two digits to set the length of a switchhook flash (01 to 80) where 1=25 mseo ( ✓ = 18, 450 msec)

ROTARY DIALING TIMEOUT (p. 38)

DIAL #108

DIAL 1 = 4 seconds 2 = 8 seconds ✓ 3 =12 seconds

OUTSIDE CONFERENCE (P. 38)

DIAL #109

DIAL 1 = Allowed ✓

2 = Disallowed

DIAL MODE ( p. 3-9)

DIAL #201

DIAL a fine number

DIAL 1 = Touch-Tone ✓

2 = Rotary

PRESS [ Next Item ] to program another line

LINE TYPE (P. 3 10)

DIAL #202

DIAL a line number

DIAL 1 = CO (outside line)✓ 2 = PBX

PRESS [ Next Item ] to program another line

HOW DISCONNECT TIME (p. 3-11)

DIAL #203

DIAL a line number

DIAL 1 = Long (450 msec) ✓

2= Short (50 msec)

PRESS [ Next Item ] to program another line

LINE ASSIGNMENT (p. 3-12)

DIAL #301

DIAL an extension number

DIAL a line number (1 to 8)

DIAL 1 = Assigned ✓ 2 = Not Assigned

PRESS [ Next tem ] to program another line for this extension

LINE USE RESTRICTI0N (p. 3-13)

DIAL #302

DIAL an extension number

DIAL a line number

DIAL 1 = No Restriction ✓

2 = Outgoing Only

3 = Incoming Only

4 = No Access

PRESS [ Next Item ] to program another line

DISPLAY LANGUAGE (p. 3-14)

DIAL #303

DIAL an extension number

DIAL	1	= English ✓
	2	= Spanish
	3	= French

PRESS [ Next Item ] program another extension

AUTOMATIC PRIVACY (p. 3-15)

DIAL #304

DIAL an extension number

DIAL 1 = Assigned

2 = Not Assigned

PRESS [ Next Item ] to program another extension

ABBREVIATED RINGING (p. 3-16

DIAL #305

DIAL an extension number

DIAL 1 = Active (On-1 ring) ✓ 2 = Not Active (Off-repeat

ringing)

PRESS [ Next Item ] to program another extension

COPY SETTINGS (p. 3-17)(skipped when cycling)

DIAL #399

DIAL a source extension number

DIAL a target extension number

For Centralized Telephone Programming and System Speed Dial Numbers, see previous page.