Copy Settings | Code: #399 |
Description: Copies the following settings from any extension to any other extension:
#301 | Line Assignment | #408 Allowed List Assignment |
#302 | Line Use Restriction | #501 Pickup Group Extensions |
#303 | Display Language | #502 Calling Group Extensions |
#304 | Automatic Privacy | #504 Night Service Group |
#305 Abbreviated Ringing | #601 Fax Machine Extensions | |
#401 | Outgoing Call Restrictions | Automatic Line Selection (p. |
#405 | Disallowed List Assignment | Line Ringing Options (p. |
Valid Entries: Any valid source extension number (the extension copied from) and any valid target extension number (the extension copied to)
Progamming Notes: This procedure is skipped in the sequence of program- ming procedures. To use this procedure, enter the procedure code directly (see step 1).
Programming Steps:
1.Press [Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 3 ] [ 9 ] [ 9 ] . The display reads:
Copy
Extension:
2.Enter the extension to copy from. For example, to copy extension 18, press [ 1 ] [ 8 ] . The display reads:
Copy 18
Data
3.Enter the extension to copy to. Any extension except the source extension is valid. For example, to copy to extension 22, press [ 2 ] [ 2 ] . The display reads:
Copy 18
Data 22
To copy the same settings to another extension, enter the new extension number.
To copy another extension’s settings, press [ Next Item ] or [ Prev Item ] until the extension shows on the display. Repeat step 3.
✓ = Factory Setting
To go to the next procedure: [ Next Proc ] | To go to a specific procedure: [# ] [ x ] [ x ] [ x ] | ||||||
|
|
|
|
|
| ||
To go to the previous procedure: [Prev Proc ] | (where XXX is the procedure number) | ||||||
|
|
|
| ||||
To return data to the factory setting: [ Remove ] | To exit system programming: [Feature ] [ 0 ] [ 0 ] | ||||||
|
|
|
|
|
|
| |
System Programming
