AT&T MLX-10 manual To Enter an Account Code Before Calling

Features

To Enter an Account Code Before Calling

1.Press programmed Account Code button, or press Feature and dial 82.

2.Dial account code followed by #. See Notes.

3.Press outside line or SA button.

4.Lift handset or press Speaker.

5.Dial phone number (including dial-out code if using SA button).

Notes:

■For step 2, if you have programmed an outside Auto Dial button with a specific account code followed by #, you can press the button whenever you need to enter the code. (See Auto Dial.)

■If you are using account codes on a conference call, follow steps 1–5 and press Conf. When adding additional

participants, repeat steps 1, 2, 3, and 5 and press Conf again.

To Enter or Change Account Codes During a Call

1.Press programmed Account Code button, or press Feature and dial 82.

2.Dial account code followed by #.

Notes:

■

■

■

Your caller does not hear you enter the account code.

If you make a mistake, you can correct the code using the above procedure.

If an account code was already entered for a call when the call arrived, you cannot change it.

Account Code Entry 5 - 3