Chapter 1. Introduction

Components

Front View

1

4 5

 

9

IPMI Enabled

2

3

6

1.Port LEDs

The Port LEDs on the left are the On Line LEDs; the ones to the right are the Selected Port LEDs:

ŠThe On Line LEDs light GREEN to indicate that the computer attached to the corresponding port is up and running. If the LED is flashing, it indicates that the Port is being used for cascading to another KH98 switch (see Two Stage Installation, page 10).

ŠThe Selected LEDs light ORANGE to indicate that the computer attached to the corresponding port is the one that has the KVM focus. The LED is steady under normal conditions, but flashes when its port is accessed under Auto Scan Mode (see F7 SCAN, page 34).

2.Port Selection Switches

Press a switch to access the computer attached to the corresponding port.

ŠPressing Buttons 1 and 2 simultaneously for 3 seconds performs a Keyboard and Mouse Reset.

ŠPressing 7 and 8 simultaneously starts Auto Scan Mode (see page 34).

3.Reset

Use a thin object (such as the end of a paper clip, or a ballpoint pen), to press this recessed switch in to initiate a reset.

5