ATEN Technology KH98 manual F3 SET:

KH98 User Manual

F3 SET:

This function allows the Administrator and each User to set up his own working environment. A separate profile for each is stored by the OSD and is activated according to the Username that was provided during Login. To change a setting:

1.Double Click it; or move the highlight bar to it, then press [Enter].

2.After you select an item, a submenu with further choices appears. To make a selection, either Double Click it; or move the Highlight Bar to it, then press [Enter]. An icon appears before the selected choice to indicate which one it is.

Note: All your setting changes are stored in temporary memory and remain in effect for the duration of your session. The changes only become permanent when you Log out of the OSD (see page 35). If you shut down the KH98 without first logging out, your changes are discarded.

The settings are explained in the following table:

Setting	Function
OSD HOTKEY	Selects which Hotkey activates the OSD function:
	[Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl].
	Since the Ctrl key combination may conflict with programs running
	on the computers, the default is the Scroll Lock combination.
PORT ID	Allows you to position where the Port ID appears on the monitor.
DISPLAY	The default is the upper right corner, but you can have it appear
POSITION	anywhere on the screen.
	Use the Mouse or the Arrow Keys plus Pg Up, Pg Dn, Home, and
	End to position the Port ID display, then Double Click or press
	[Enter] to lock the position and return to the Set submenu.
PORT ID	Determines how long a Port ID displays on the monitor after a port
DISPLAY	change has taken place. The choices are:
DURATION	User Defined - which lets you select the amount of time (from 1 -
	255 sec.)
	Always On - which displays the Port ID at all times.
	If you select User Defined, key in the number of seconds, then
	press [Enter].
	The default is 3 Seconds. A setting of 0 (zero) disables this
	function.
	(Continues on next page.)

24