ATEN Technology KH98 manual 44

KH98 User Manual

(Continued from previous page.)

Setting	Function
SET KVM IP & MAC Allows you to configure and view the KH98 network
information. This is necessary to establish a network
connection with the IPMI enabled servers in your installation.
KVM IP: Use this option to set the IP address of your KH98.
There are two options to choose from: DHCP and USER
DEFINED.
1.	Select the SET TCP/IP field, then press [Enter].
2.	Select DHCP or USER DEFINED, then press [Enter].
	Š If you selected DHCP, then the IP address, the Subnet
	Mask, and the Gateway will be assigned automatically.
	Š If you selected USER DEFINED, then enter the IP
	address and then press [Enter]. The IP address should
	adhere to the following format xxx.xxx.xxx.xxx. For
	example, 192.168.0.23
KVM MAC: Displays the MAC address of your KH98.
KVM SUBNET MASK: Allows you to set the Subnet Mask for
the IP address.
1.	Select KVM SUBNET MASK, then press [Enter].
2.	Type the Subnet Mask, then press [Enter]. The Subnet
	Mask should conform to the following format
	255.xxx.xxx.xxx. For example, 255.255.255.0
KVM GATEWAY: Use this option to set the Gateway server
address.
1.	Select KVM GATEWAY, then press [Enter].
2.	Type the Gateway server address, then press [Enter]. The
	Gateway server address should adhere to the following for-
	mat xxx.xxx.xxx.xxx. For example, 192.168.0.23.

Note: The KH98 will only be operable after successfully pinging it. The pinging process may need to be repeated up to six times.

ACTIVATE PET	Use this setting to enable/disable receiving IPMI ALERT
ALERT	messages.
	Y (for ON), or N (for OFF).
	When enabled, you can view each message under F6 PET
	Alerts:. The default value is Y (ON).
CLEAR BMC INFO	This setting allows you to delete stored information for each
	the IPMI enabled server in your KH98 installation.
KVM PET AUTO	Enables / Disables the KVM PET AUTO SWITCH function.
SWITCH	See The KVM PET AUTO SWITCH, page 33 for additional
	information.

30