ATEN Technology KH98 manual F4 ADM:

KH98 User Manual

F4 ADM:

F4 is an Administrator only function. It allows the Administrator to configure and control the overall operation of the OSD. To change a setting Double Click it; or use the Up and Down Arrow Keys to move the highlight bar to it then press [Enter].

After you select an item, a submenu with further choices appears. Double Click the choice you want, or move the Highlight Bar to it then press [Enter]. An icon appears before the selected choice so that you know which one it is.

Note: All setting changes remain in temporary memory for the duration of the session. Changes become permanent after Logging out of the OSD. Shutting down the KH98, without logging out first, will discard any changes made during a session.

The settings are explained in the following table:

Setting	Function
SET USERNAME	This function is used to set Usernames and Passwords for the
AND	Administrator and Users:
PASSWORD	1. One Administrator and four User passwords can be set.
	2. After you select the Administrator field or one of the User fields,
	a screen that allows you to key in your password appears. The
	password may be up to 15 characters long, and can consist of
	any combination of letters and numbers (A - Z, 0 - 9).
	3. For each individual, key in the Username and Password, then
	press [Enter].
	4. To modify or delete a previous Username and/or Password, use
	the backspace key to erase individual letters or numbers.
SET LOGOUT	If there is no input from the console for the amount of time set with
TIMEOUT	this function, the Operator is automatically logged out. A login is
	necessary before the console can be used again.
	This enables other Operators to gain access to the computers
	when the original Operator is no longer accessing them, but has
	forgotten to log out. To set the timeout value, key in a number from
	1 - 180 minutes, then press [Enter]. If the number is 0 [zero], this
	function is disabled. Default is 0 (disabled).

(Continues on next page.)

26