Chapter 2. Hardware Setup
4.Use KVM cable sets (described in the Cables section, page 3), to connect any available KVM port on the Second Stage unit to the Keyboard, Video, and Mouse ports of the computers you are installing.
5.Plug the power cord that came with this package into the KH98's Power Socket, and then into an AC power source.
6.Repeat the previous steps for any other Second Stage units you wish to connect.
7.Power on the monitor.
8.Power on the First Stage unit(s), then power on the Second Stage unit.
9.Turn on the power to all the computers.
Note: The Power On sequence requires that all First Stage units be powered on first. After they are all on, the Second Stage units must be powered on next. After completing this sequence, power on the computers.
LAN
POWER
LAN
BMC BMCBMC
(Out of Band)
LAN
POWER
BMC | BMC | BMC | BMC |
(Out of Band)
11