Chapter 1. Introduction

Rear View

1

2

3

4

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LAN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

1.Power Socket

2.Power Switch

3.LAN Port (IPMI)

The Category 5 cable used to connect the KH98 to the IPMI Management LAN plugs in this RJ-45 connector. See diagram on page 10 for details.

4.Console Port Section

ŠIf this is a first station unit, your monitor, keyboard and mouse plug in here.

ŠIf this is a daisy chained unit, the cables that link back to a port on a higher KH98 unit plug in here.

5.KVM Port Section (CPU Port Section)

The cables that link to the computers plug in here.

6.Firmware Upgrade Section

ŠFirmware Upgrade Switch

During normal operation this switch should be in the NORMAL position.

ŠFirmware Upgrade Port

The Firmware Upgrade Cable that transfers the firmware upgrade data from the administrator's computer to the KH98 plugs into this RJ-11 connector.

Note: See page 43 for firmware upgrading details.

7